Engineer replacing an electric immersion heater element — Immersion Element in Leeds

SAME-DAY FIX

Immersion Heater Element Replacement in Leeds

No hot water from your immersion, or the element has burnt out? We drain the cylinder, replace the immersion element and thermostat, and have hot water restored — usually the same day.

Gas Safe Registered24/7 Available5.0 Google ReviewsFixed Pricing

Get Your Free Quote 07598 088229

Get Your FREE Quote

Takes 60 seconds. No obligation.

⚡ We typically respond within 60/90 minutes

Hot water back the same day

Trusted Immersion Heater Element Replacement in Leeds

An immersion heater is the electric element inside your hot water cylinder — and when it fails you're left with cold water, a tripping fuse, or water that never gets properly hot. We isolate the electrical supply, drain the cylinder down, remove the old element (often seized solid with limescale in hard-water areas), fit a new element and immersion thermostat, refill and bleed the cylinder, and confirm it heats to a safe temperature. Where the boss is corroded we can advise on your options, and we always fit the correct length element for your specific cylinder.

What We Cover

Burnt-out or failed immersion elements
Immersion tripping the electrics / RCD
Water not getting hot or only lukewarm
Faulty or stuck immersion thermostats
Limescale-seized elements in hard-water areas
Economy 7 dual-element cylinder faults
Corroded immersion boss advice
Backup immersion on a cylinder heated by boiler

Signs You Need This Service

No hot water despite the immersion being on
Immersion keeps tripping the fuse board
Water heats very slowly or never gets hot
Scalding water with no temperature control
Burning smell from the immersion or wiring

Spotting any of these? Call us today — 07598 088229

Why Choose Us for Immersion Element

Local, trusted, and built on doing the job right the first time.

Same-day element and thermostat replacement

Correct length element for your cylinder

Cylinder drain-down and refill included

Immersion thermostat set to safe temperature

Advice on dual/economy 7 immersion setups

12-month workmanship guarantee

Real Reviews From Real Plumbing Customers

5.0from 200+ Google reviews

Mal Gaskell

Verified Customer

3 weeks ago

Exceptional service! Was incredibly professional, friendly, and helpful from start to finish. Arrived promptly the very next day and went above and beyond to ensure all our issues were resolved. The workmanship was flawless. We are absolutely delighted with the result and highly recommend his services to anyone.

Kathryn Berry

Verified Customer

2 month ago

Great service, came out tonight, late Saturday night, within an hour or so of calling, kept us updated on arrival time. Diagnosed problem quickly, went away for a part and came back to fit it. Had our boiler working and heating going in no time, thank goodness as it's absolutely freezing! Good communication and went out of his way to help, will definitely use again.

Jack Nottidge

Verified Customer

1 Month ago

Brilliant service from start to finish. We had our gas fire capped and I can’t fault the job at all. Attiq was on time, did a perfect job and massively went above and beyond in helping me when he found an issue with our gas meter that the supplier had to come and fix. Thank you! 10/10

View all 200+ Google Reviews Write a Review

Immersion Element FAQs

Common questions about immersion heater element replacement in Leeds.

Why does my immersion heater keep tripping the electrics?

A tripping immersion almost always means the element has failed internally and is leaking current to earth. The safe fix is to replace the element — we don't recommend resetting and continuing to use it.

How long does it take to replace an immersion element?

Around 1–1.5 hours in most cases, including draining and refilling the cylinder. In hard-water areas a heavily scaled element can take a little longer to remove.

Do I need an electrician as well?

Usually not — replacing the element and thermostat is plumbing and heating work we complete in one visit. If the wiring or a separate immersion switch is faulty we'll let you know.

My hot water is heated by the boiler — why have an immersion?

Many cylinders have an immersion as a backup for when the boiler is down or for cheaper overnight Economy 7 heating. It's well worth keeping it working.