Newly installed washing machine in a utility room — Washing Machine in Leeds

SAME-WEEK BOOKING

Washing Machine Installation in Leeds

New washing machine to plumb in or an old one to swap out? We connect the fill and waste, fit an isolation valve, level the machine and run a test cycle — leaving it working and leak-free.

Gas Safe Registered24/7 Available5.0 Google ReviewsFixed Pricing

Get Your Free Quote 07598 088229

Get Your FREE Quote

Takes 60 seconds. No obligation.

⚡ We typically respond within 60/90 minutes

Plumbed, levelled & leak-tested

Trusted Washing Machine Installation in Leeds

A washing machine is one of the most common sources of household leaks when it's not connected properly. We fit or replace the washing-machine valve on the cold supply, connect the fill hose and waste with the correct standpipe or spigot and anti-siphon loop, remove the transit bolts, level the machine so it doesn't 'walk' on spin, and run a short cycle to confirm there are no drips. We can disconnect and remove your old machine and adapt the plumbing where the new appliance sits differently.

What We Cover

New washing machine supply and waste connection
Like-for-like washing machine replacement
Fitting or replacing the washing-machine valve
Connecting waste to a standpipe or sink trap
Relocating a machine to a new position
Curing leaks from a previous DIY install
Fitting isolation valves for easy servicing
Hot and cold fill machine connections

Signs You Need This Service

Water leaking behind or under the machine
Machine won't fill or won't drain
No isolation valve to shut the supply off
New appliance still boxed and needs fitting
Old, perished fill hoses at risk of bursting

Spotting any of these? Call us today — 07598 088229

Why Choose Us for Washing Machine

Local, trusted, and built on doing the job right the first time.

Fill and waste connected correctly

New washing-machine isolation valve fitted

Transit bolts removed and machine levelled

Anti-siphon waste connection to prevent backflow

Old appliance disconnection and removal available

Full test cycle and leak check before we leave

Real Reviews From Real Plumbing Customers

5.0from 200+ Google reviews

Mal Gaskell

Verified Customer

3 weeks ago

Exceptional service! Was incredibly professional, friendly, and helpful from start to finish. Arrived promptly the very next day and went above and beyond to ensure all our issues were resolved. The workmanship was flawless. We are absolutely delighted with the result and highly recommend his services to anyone.

Kathryn Berry

Verified Customer

2 month ago

Great service, came out tonight, late Saturday night, within an hour or so of calling, kept us updated on arrival time. Diagnosed problem quickly, went away for a part and came back to fit it. Had our boiler working and heating going in no time, thank goodness as it's absolutely freezing! Good communication and went out of his way to help, will definitely use again.

Jack Nottidge

Verified Customer

1 Month ago

Brilliant service from start to finish. We had our gas fire capped and I can’t fault the job at all. Attiq was on time, did a perfect job and massively went above and beyond in helping me when he found an issue with our gas meter that the supplier had to come and fix. Thank you! 10/10

View all 200+ Google Reviews Write a Review

Washing Machine FAQs

Common questions about washing machine installation in Leeds.

Can you plumb in a washing machine where there's no connection?

Yes — we can tee off a nearby cold supply, fit a washing-machine valve, and run a new waste connection to a standpipe or sink trap so you can site the machine where you want it.

Do you remove the old washing machine?

We can disconnect and take away your old machine and arrange responsible disposal for a small extra charge. Let us know when booking.

How long does it take to fit a washing machine?

A like-for-like swap onto existing plumbing takes 45–60 minutes including the leak test. New pipework or relocation takes a little longer.

Why does my washing machine leak on fill?

Usually it's a loose hose connection, a worn valve, or a perished fill hose. We fit fresh connections and pressure-check them so it's watertight.