Limited Time Offer: Boiler Servicing from only £79!
Book Now →
Chrome outdoor garden tap mounted on a supply pipe — Outdoor Tap in Skipton
FIXED PRICING

Outdoor Tap Installation in Skipton

Want a tap in the garden for the hose, car or pressure washer? We fit a fully compliant outside tap with a double-check valve and internal isolator — usually in under two hours.

Gas Safe Registered24/7 Available5.0 Google ReviewsFixed Pricing
Chrome outdoor garden tap mounted on a supply pipe — Outdoor Tap in Skipton

Get Your FREE Quote

Takes 60 seconds. No obligation.

⚡ We typically respond within 60/90 minutes

0/500

No spam. Your details stay private.

Trusted Outdoor Tap Installation in Skipton

An outside tap makes watering, car washing and jet washing effortless, but it must be installed to WRAS standards to protect your drinking water. We tee off your internal cold supply, fit an isolation valve so you can shut the tap off in winter, install a double-check valve to prevent backflow contamination, drill a neat core through the wall, and mount a frost-resistant bib tap outside. Everything is pressure-tested and sealed weatherproof. We can also add a drain-down point so you can protect the pipe from freezing.

What We Cover

  • New outside tap installation
  • Garden tap for hose, car wash or pressure washer
  • Isolation and drain-down point for winter
  • Replacing an old or seized outdoor tap
  • Repairing a dripping or leaking garden tap
  • Frost-damaged outside pipe and tap repair
  • Standpipe or additional garden supply
  • Backflow-compliant upgrade of a non-compliant tap

Signs You Need This Service

  • Dragging hoses through the house to the garden
  • Existing outside tap dripping or seized
  • Tap or pipe split after a hard frost
  • No isolation valve to shut the tap off in winter
  • Old tap with no backflow protection fitted

Spotting any of these? Call us today — 07598 088229

Why Choose Us for Outdoor Tap

Local, trusted, and built on doing the job right the first time.

WRAS-compliant double-check valve fitted
Internal isolation valve for winter shut-off
Neat, sealed core drill through the wall
Frost-resistant outside bib tap
Most installs completed in under 2 hours
Fully pressure-tested and weather-sealed

Outdoor Tap FAQs

Common questions about outdoor tap installation in Skipton.

How long does fitting an outside tap take?
Most installations take 1–2 hours where the internal cold supply is within easy reach of an external wall. Longer pipe runs take a little more time.
Do I need a special valve for an outside tap?
Yes — water regulations require a double-check valve to stop garden water siphoning back into your drinking supply. We fit one as standard on every outside tap.
Will the tap freeze in winter?
We fit a frost-resistant tap and an internal isolation valve so you can shut off and drain the pipe in cold weather. We can also add a dedicated drain-down point for full protection.
Can you fit a tap far from my kitchen sink?
Yes — we can run new pipework to reach the position you want, whether that's a different wall, the garage or the far side of the house. We'll quote the pipe run at the booking stage.

Need a Outdoor Tap in Skipton?

Book your free no-obligation quote — we typically respond within 60 minutes.

Local Plumbers, Local Knowledge — Skipton

Why local matters: we know the housing stock, the water hardness, and the postcode quirks of Skipton.

Skipton is the gateway to the Yorkshire Dales and our work splits between the historic town centre (stone terraces, often with combi boilers retro-fitted into chimney breasts) and rural properties beyond Embsay and Gargrave. Rural homes here are commonly off the gas grid — we install and service oil-fired boilers, LPG combis, and air-source heat pumps for properties without a mains-gas connection. The harder water from the Eshton Beck supply means cylinder coils scale faster than in Ilkley, so we recommend annual chemical descaling for unvented systems.

Postcodes Covered
BD23
Chat with us!